Blog

O'Hare: from a C-54 factory airfield to a global hub

How Orchard Field, built for Douglas C-54 transports in World War II, became O'Hare: the 1949 renaming, the jet age, the hub era and the building under way now.

The airport that moves more of Chicago's air travel than any other started out as a place where airplanes were built, not boarded. During World War II the Douglas Aircraft Company ran a plant on a patch of land northwest of the city and used an adjoining field to deliver the C-54 transports it made. The field was called Orchard Field, after the nearby settlement of Orchard Place, and its three-letter code, ORD, comes from that name and has stuck for eight decades. The road from factory field to today's airport, which sits about 17 miles from downtown on the Northwest Side, is the story of a city deciding, almost in one step, to move its air traffic out of a crowded neighborhood airport and into a field with room to grow.

The wartime field

The land at Orchard Place had a wartime job: building and testing C-54 Skymaster transports, the four-engine cargo planes that carried people and supplies for the Army Air Forces. When the war ended, the plant's work stopped, and the question became what to do with the property. In 1945 and 1946, Chicago chose the Orchard Field site as the place for its next airport and acquired most of the federal property. The reason was space. The city's existing airport, Midway, sat on a single square mile surrounded by residential blocks and could not expand, and the planners wanted an airport that could handle larger aircraft and many more flights. Midway Airport: Chicago's first big airport tells that story from the other side.

Why it says ORD

In 1949 the airport was renamed for Edward "Butch" O'Hare, a Navy fighter pilot who grew up in Chicago, was killed in World War II and became a symbol of the city's contribution to the war effort. The new name replaced Orchard Field on maps and signs but not in the code. Airports keep their code, and ORD still carries the memory of Orchard Place. A traveler looking at "ORD" on a boarding pass may wonder where the R came from: the letters are a leftover from "Orchard."

Built for jets

The years after the renaming were a stretch of long construction and slow growth. The Air Force used the field as a fighter base from 1950 to 1959. Scheduled passenger service began in 1955. In 1958 the first international terminal opened, and the airport had the world's first jet bridge, the covered walkway that connects a terminal gate to the door of an airplane and is now a feature of every major airport. On March 22, 1959, the first scheduled jet flight arrived, an American Airlines Boeing 707.

Jets were the reason O'Hare mattered. The 707 and the DC-8 needed longer runways than Midway had, and the city had a new airport with room. In 1960 the expressway link to downtown, now the Kennedy, was completed, giving O'Hare the road connection it needed (see how the expressways were built). On January 1, 1962, Terminals 2 and 3 opened, and scheduled airline flights moved from Midway. For about 35 years afterward, from 1963 to 1998, O'Hare was the world's busiest airport by passenger traffic, a position that suited the mayor of the period, Richard J. Daley, who made the airport part of his legacy (see The Daley years, 1955 to 1976).

The hub era

The next change came out of Washington. After the deregulation of the airline industry, carriers reorganized their networks around hubs, airports where many flights arrive and depart together so that passengers can connect between them. At O'Hare, United and American built the hubs that operate today. TWA and Northwest left, and Delta closed its Chicago hub in the 1990s. The hub system is why a large share of the people moving through O'Hare are not coming to Chicago at all: they are changing planes on the way somewhere else.

The buildings changed with the airlines. The original Terminal 1 was demolished in 1984, and United's Terminal 1, designed by the architect Helmut Jahn, was built from 1985 to 1987. In 1993 the International Terminal, now Terminal 5, opened. Those are the terminals travelers use today, along with Terminals 2 and 3 from the early 1960s. For the airline that operates the largest share of flights at O'Hare, see United Airlines and O'Hare's hub economy.

Getting there by train

The CTA's Blue Line reaches the terminals. The O'Hare extension opened in 1984 and made the airport reachable by rail for travelers who would otherwise have needed a bus or a car. The fare to board a train at the O'Hare station is $5, higher than the standard $2.50 'L' fare, and the ride from the Loop takes the better part of an hour. The Blue Line to O'Hare and back follows the line stop by stop, and Getting from O'Hare to the Loop gives the steps.

The twenty-first-century rebuild

By the 2000s O'Hare's runway layout, a set of crossing runways that had grown over decades, was a steady source of delays. In 2001 the city committed to the O'Hare Modernization Plan, which reorganized the airfield into a system of parallel runways. The FAA approved the plan in October 2005. Work proceeded in phases: the sixth parallel runway, 9C/27C, began construction in 2016 and was finished in 2020, and the extension of runway 9R/27L was completed in 2021. The point of the parallel layout is capacity: parallel runways allow more arrivals and departures at once, and they cut the conflicts that crossing runways create in bad weather.

The terminals are being reworked, too. In 2018 the city and the airlines committed to Phase I of O'Hare 21. On May 3, 2024, American and United reached an agreement with the city to continue the Global Terminal project, accelerating the replacement of Terminal 2. In August 2025 construction began on Concourse D, the first phase of the program known as ORDNext, with completion scheduled for late 2028. Construction of this size takes years, and travelers can expect changes to gates, walkways and some terminal layouts while it is under way. The Department of Aviation, which runs both O'Hare and Midway, publishes construction updates on flychicago.com; the department is profiled at Chicago Department of Aviation.

Why the site mattered

Picking a field far from the center had consequences that still shape the region. O'Hare sits well outside the dense part of the city, near the edge where Chicago meets its northwest suburbs, and it is at the end of a long corridor: the Kennedy Expressway and the Blue Line both run from the Loop to the airport, with the neighborhoods of the Northwest Side between them. That corridor is why the line has stations such as Jefferson Park along the way (Jefferson Park) and why traffic on the expressway to the airport is a regular item on the morning traffic report.

The distance also explains the airport's scale. A field with room for long runways, large aprons and several terminals could be developed in stages over decades, and it was. Midway, by contrast, stayed on its one square mile. The two airports now serve different roles: O'Hare as the hub for the two big network airlines and for international flights, and Midway as the base for a single large low-fare carrier.

Reading the codes

Airport codes are a small piece of history of their own. ORD is O'Hare's code and goes back to Orchard Field; MDW is Midway's code. When you book a flight, check which of the two you are choosing, because they are on opposite sides of the city and use different train lines: the Blue Line to O'Hare and the Orange Line to Midway. Get it wrong and you will find out the hard way, as The Orange Line to Midway describes.

O'Hare today

O'Hare sits mostly in the City of Chicago, though a small part of the airport lies in DuPage County. It is on the Northwest Side, close to the suburb of Rosemont, and the expressway and the Blue Line are its main links to downtown. The airport's two hub airlines mean that flights run to a great many cities, and the airport is a major point for connecting traffic across the country. For the nuts and bolts of reading delays and planning around them, see reading airport delays before you leave home.

A timeline

  • World War II: Douglas builds C-54 transports at the Orchard Place plant; the field is Orchard Field.
  • 1945 to 1946: the city chooses the site and acquires most of the federal property.
  • 1949: the airport is renamed for Edward "Butch" O'Hare and keeps the code ORD.
  • 1955: scheduled passenger service begins.
  • 1958: the first international terminal opens, with the world's first jet bridge.
  • March 22, 1959: the first scheduled jet flight arrives.
  • 1960: the expressway link to downtown is completed.
  • January 1, 1962: Terminals 2 and 3 open; scheduled flights move from Midway.
  • 1963 to 1998: O'Hare is the world's busiest airport by passenger traffic.
  • 1984: the original Terminal 1 is demolished; the Blue Line reaches the airport.
  • 1985 to 1987: United's Terminal 1 is built.
  • 1993: the International Terminal opens.
  • 2005: the FAA approves the O'Hare Modernization Plan.
  • 2016 to 2021: new parallel runway work is completed.
  • August 2025: Concourse D groundbreaking begins ORDNext.

Look down the list and the pattern is plain. Each stage grew out of a pressure the one before it had created: the need for room led to Orchard Field, the arrival of jets led to the new terminals, deregulation led to the hubs, and the hubs' demands led to the modernization of the runways and the terminals now going up.

Related city government

Related guides

Related neighborhoods

Latest on this topic