Blog
The canal country southwest of the city
A day trip along the Illinois and Michigan Canal and the Sanitary and Ship Canal, from Bridgeport to Lockport and Joliet, by Metra or by road.
Follow the water. That is the only honest way to understand the country southwest of Chicago, and it takes two ditches. They were dug about half a century apart, for different reasons, and they run side by side for much of the way to Joliet. The first, the Illinois and Michigan Canal, was cut so a mule-drawn boat could get from Lake Michigan to the Illinois River. The second, the Chicago Sanitary and Ship Canal, opened on January 2, 1900, and its job was to send the city's sewage somewhere other than the drinking water. Between them they explain why Chicago sits where it sits, why the river runs backward, and why a string of old limestone towns lines a corridor southwest of the Loop.
Bring a free day and a Metra pass. You do not need a car, though a car makes the middle of the afternoon a lot easier.
The first stop is a portage
Before the canal there was a carry. In 1673 Louis Jolliet and Father Jacques Marquette came north from the Mississippi by way of the Illinois River and crossed the low ground between the Des Plaines River and the Chicago River, a short haul between two enormous river systems. That muddy crossing is the reason the Chicago area exists at all. A canoe could travel from the Great Lakes to the Gulf of Mexico with only a few miles of portaging. The Chicago Portage: the short canoe route that made a city tells the story, and a stop at the portage site on the city's southwest edge, a patch of woods and sloughs, makes it real.
The canal builders wanted to get rid of the carry altogether. So they dug a ditch where the portage ran and filled it with water. Simple idea. It took a decade.
Bridgeport: where the canal began
The Illinois and Michigan Canal started in what is now Bridgeport, on the South Branch of the Chicago River. Bridgeport describes the neighborhood today, and Bridgeport and the South Branch walks its river edge. Construction began on July 4, 1836, and the canal opened in 1848, the same year the city's first railroad, the Galena and Chicago Union, was finished. The canal ran about 96 miles, from Chicago to the Illinois River at LaSalle and Peru, and it handed Chicago a direct water route to the Mississippi system. the canal, the railroads and the making of a hub picks up what came next: the canal made the city's commercial reputation, and the railroads that showed up almost immediately made the canal obsolete.
It left its mark on the map, too. The state sold land along the route to pay for construction, and the commissioners who ran the project had the town of Chicago surveyed in 1830. James Thompson's plat of that year, filed on August 4, is traditionally taken as the city's official recognition. The street grid you walk in the Loop is, in other words, a canal commission's idea of where a town would grow.
Bridgeport itself is a working-class neighborhood on the South Branch with a long history of immigrant settlement. For this trip the point is plainer: the canal began here, and the river edge still feels industrial in the old way.
The second canal: sanitary and ship
By the 1880s the Chicago River had turned into an open sewer that drained into the lake, which was also where the city got its drinking water. You can see the problem. Waterborne disease was a regular visitor, and the city's answer was to reverse the river, a decision Reversing the river: the Sanitary and Ship Canal covers in detail. The Metropolitan Sanitary District, today's Metropolitan Water Reclamation District of Greater Chicago, dug the Sanitary and Ship Canal. It opened on January 2, 1900, and sent the flow of the Chicago River southwest toward the Des Plaines River and the Illinois. A canal that was a sewer was also, in the language of the time, a ship canal, wide enough for barges. Barges still use it, hauling grain, aggregates and other bulk freight through the corridor.
Nobody will call the Sanitary and Ship Canal pretty. It is straight, wide and industrial, lined with quarries, power plants and barge terminals. But it is the reason the Chicago River flows the way it does, and a walk along it gives you a feel for the scale of the engineering. Metropolitan Water Reclamation District of Greater Chicago describes the agency that still runs it.
Lockport: where the canal is still a town
Lockport is the best single stop on the route. The Illinois and Michigan Canal's headquarters sat here, and the town grew up around the canal's locks and the limestone quarried nearby. The Gaylord Building, a big limestone warehouse built in 1838, is the best-known survivor, and today it works as a visitor center and local history museum for the canal story. A towpath trail follows the old canal bank out of town, and the Lockport area also has remnants of the original locks.
Walk downtown first, past the canal-era buildings, then take the towpath for a mile or two. The old mule path is flat, shaded and easy, and it shows you the canal in a way a car window never will. A lock and a dam on the Sanitary and Ship Canal sit a short distance away and mark where the later canal's water is controlled. That makes Lockport the one place where you can see both canals in a single afternoon.
The corridor has an official name. In 1984 Congress created the Illinois and Michigan Canal National Heritage Corridor, the first national heritage area in the United States, to preserve the canal's towns, locks and landscapes. It is not a national park in the usual sense. It is a patchwork of local sites and trails that the heritage designation helps stitch together.
Joliet: limestone, rail and Route 66
Joliet is the biggest city on the route and the seat of Will County. It carries the name of Louis Jolliet, the explorer who came through in 1673. The town grew up on limestone quarrying, steelmaking and the railroads, and downtown still has the brick and stone buildings of that period. Three places show you what the city was.
- The Rialto Square Theatre, a 1926 movie palace on Chicago Street, one of the grandest surviving theaters from the era, still hosting concerts and shows.
- The old Joliet prison, a limestone fortress that opened in the 1850s and closed in 2002. Tours are offered from time to time; check the current schedule.
- The Joliet Iron Works Historic Site, the ruins of a nineteenth-century iron and steel works, set beside the canal.
Route 66 runs through Joliet too, and the city has long made the most of its spot on the old highway, which started in Chicago and ran southwest to California. For part of its length the historic route followed the Illinois and Michigan Canal corridor, which is why driving it and walking the towpath feel like cousins.
What the canal carried, and what became of it
For a few decades the Illinois and Michigan Canal was the busiest way into the interior. Mules walked the towpath pulling the boats. Manufactured goods and settlers' supplies went downstate, and grain, stone and, in later years, coal came north. Next to the later Sanitary and Ship Canal, which could take far larger barges, the old canal was shallow, and once the new one opened there was no commercial reason for the old one to stay in business. It was closed to commercial navigation in 1933.
It escaped the fill dirt through a mix of public works and preservation. In 1935 the Civilian Conservation Corps and the National Park Service restored some of the locks, and over the following decades the towpath turned into a recreational trail. Today the Illinois and Michigan Canal State Trail runs along much of the old route, and the heritage corridor's local museums and visitor centers fill in the history. On foot or by bike the trail is the best way to see the canal, and it is far quieter than the lakefront.
Getting there and back
Two Metra lines reach Joliet from the Loop, and the Metra system is now the Commuter Rail Division of the Northern Illinois Transit Authority. The Heritage Corridor line runs from Union Station through the canal towns, Lemont and Lockport among them, to Joliet, but the service is limited and concentrated in the commuting direction, so check the schedule before you plan a day return. The Rock Island District line runs from LaSalle Street Station through the south suburbs to Joliet with more frequent service. Four downtown Metra terminals compared explains which downtown terminal each line uses, and metra for first-time riders covers tickets. Amtrak's Lincoln Service also stops at Joliet on its way to Springfield, and Union Station and Amtrak's Midwest hub describes the Chicago terminal.
Driving, take I-55, the Stevenson Expressway, southwest out of the city. It hugs the canal for most of its run. Lockport and Joliet are both a short hop from an exit.
How to spend the day
Here is a sensible plan. Take the Heritage Corridor in the morning if the schedule allows and get off in Lockport. Tour the Gaylord Building, walk the towpath, eat lunch downtown, then carry on to Joliet by the afternoon train or a short drive. In Joliet, step into the theater's lobby, see the downtown, and head home on the Rock Island line, which runs later. If the Heritage Corridor schedule does not work for you, ride the Rock Island line to Joliet and spend the whole day there. Lockport is the stop to add if you have a car.
This is not the Chicago that gets shown to visitors. It is the Chicago that built the rest, where the engineering of the 1830s and the 1890s is still out in the open, and where quarries, locks and old stone towns tell you how a swamp at the bottom of a lake became a metropolis. raising the city out of the mud: the 1856 grade decision is the companion piece on the other end of that story.