Blog
Rail yards and the freight economy
A timeline of how Chicago became the place where North American railroads meet, from the 1848 canal and first rail line to the CREATE program today.
1673. French explorers Louis Jolliet and Jacques Marquette pass through the Chicago Portage, the short carry between the Great Lakes and the Mississippi system. Everything on this timeline follows from that one spot on the map. Chicago sits where the water routes of the interior and the Great Lakes nearly touch, and every transportation technology since, from canoe to canal to railroad to interstate, has tried to turn that fact into a toll booth.
Before the rails
For a century and a half after the portage, the crossing was canoes and trading posts. Fort Dearborn went up in 1803, got destroyed in 1812 and was rebuilt in 1818. The town of Chicago was incorporated on August 12, 1833, with a population of about 350. What turned a swampy settlement into a city was the move to bulk transport, and it hit all at once. The Chicago Portage: the short canoe route that made a city covers the earliest chapter.
1848: the canal and the first railroad
Two projects opened in 1848. The Illinois and Michigan Canal linked Lake Michigan with the Illinois River, and from there the Mississippi, and the Galena and Chicago Union Railroad, the city's first rail line, was completed. The Board of Trade began trading the same year. Within a few years, rail lines reaching for the city from the west and the east made Chicago the place where farm freight went from rail to lake boat and, more and more, from one railroad to another. the canal, the railroads and the making of a hub tells the story in detail.
The rule that gave Chicago its freight economy was simple. Lines from different directions ended here, so goods had to be transferred, stored, sorted and reloaded here. Every transfer meant a warehouse, a yard, a crew and a market. Somebody always got paid.
1865: the Union Stock Yards
On December 25, 1865, the Union Stock Yards opened on the South Side. Livestock came in by rail from the plains and went out as packed meat, by rail again. The yards were as much a rail operation as a meat operation, and they lived off the dense web of tracks that fed them. The neighborhood that grew up beside them, today's Back of the Yards, is covered in Back of the Yards, and the yards' legacy in Back of the Yards after the stockyards.
1871: the fire and the rebuilding
The Great Chicago Fire of October 8 to 10, 1871, killed about 300 people, destroyed roughly 17,000 structures and left more than 100,000 people homeless. The rebuilding drew on the city's ties to the national network. Lumber, brick and steel poured into a city that was already the continent's crossroads, and the speed of the recovery is one of the places the freight economy shows up in the city's history. See The Great Chicago Fire of 1871, night by night.
1894: the Pullman strike
Chicago's rail connections also turned local labor fights into national events. On May 11, 1894, about 4,000 workers at the Pullman Company's plant on the Far South Side walked out after wage cuts. The American Railway Union, led by Eugene V. Debs, called a boycott of trains carrying Pullman cars. At its peak the boycott involved about 250,000 workers in 27 states, and it stopped much of the nation's rail traffic. A federal court issued an injunction against the union's leaders, and troops, about 12,000 Army soldiers in all, were sent to Chicago in early July. The strike ended in defeat for the union. The episode, covered in The Pullman strike of 1894, shows how central the Chicago rail network was to the national economy: a dispute in one company town could stop a continent's trains.
1900: the river reversed
On January 2, 1900, the Chicago Sanitary and Ship Canal opened and turned the Chicago River around, so that sewage flowed away from Lake Michigan toward the Illinois River. The canal also served shipping, and it made a barge route between the lakes and the Mississippi system that works alongside the rails. Freight in Chicago has always been a mix of modes, and the water routes still carry bulk goods. Reversing the river: the Sanitary and Ship Canal describes the project.
The twentieth century: two hubs in one
By the early twentieth century, Chicago's passenger terminals, the stations Metra and Amtrak still use, stood next to the freight yards. Chicago Union Station on the West Side of the Loop remains Amtrak's flagship Midwest station, with six Metra lines terminating there. The freight railroads built a patchwork of yards, junctions and belt lines to pass cars among the major carriers, and that patchwork, designed for an age of switching individual cars by hand, is still part of the landscape. Union Station and Amtrak's Midwest hub covers the passenger side.
Highways joined the rails in the 1950s and 1960s, when the expressways were built, and the airports followed. The region became a four-mode crossing: rail, truck, air and water. The warehouses and distribution centers ringing the city are the modern form of that history.
2003: CREATE
By the early twenty-first century the old patchwork had become a bottleneck. Freight trains, commuter trains and cars all fought for the same crossings, and a delay at one junction could spread across the region. In 2003 the federal and state governments, the City of Chicago, Cook County and the railroads announced the Chicago Region Environmental and Transportation Efficiency Program, known as CREATE.
CREATE is a partnership of public agencies and private railroads to modernize the rail network. According to the program, six of the seven major North American railroads serve Chicago, and each of those six is a partner. The region handles 47 percent of the nation's rail intermodal containers and 28 percent of its rail cars. The plan identified 70 projects, such as flyovers that lift one line over another and grade separations that put a road over or under tracks. As of April 2025, 35 of the 70 were complete. The program's estimated cost is $4.6 billion. For city streets, the payoff is fewer waits at crossings and smoother passenger trains. Chicago Department of Transportation manages the city's role in street and bridge projects that touch the tracks.
A glossary of the freight landscape
Rail vocabulary makes the map easier to read.
- A yard is a set of parallel tracks where trains are built and taken apart. Cars arrive on one train, get sorted by destination and leave on another.
- An interchange is where one railroad hands cars to another. Chicago's reputation as the place where railroads meet rests on the number and busyness of its interchanges.
- Intermodal freight moves in containers that travel by rail, truck or ship without being unpacked. An intermodal terminal is where a crane lifts a container from a train to a truck chassis, or the reverse.
- Carload freight moves in individual rail cars: grain, chemicals, lumber, automobiles. It is the older form of the business and still a big one.
- A grade crossing is where a road crosses a track at street level. A grade separation lifts the road or the track so they no longer meet. A flyover does the same for two railroad lines, so trains on crossing routes do not have to wait for each other.
- A belt line is a railroad that circles a city, moving cars among the main lines without sending them through downtown.
In those terms, the CREATE projects are an effort to untangle a junction built for one century and used in another. Each flyover or grade separation removes a spot where two flows used to wait on each other.
How a crossing becomes a bottleneck
The mechanics of delay are not obvious until you picture them. A freight train can run a mile or more long. A train stopped across a street blocks every vehicle until it moves. A train waiting on a signal at a junction blocks the lines that cross it, and those lines back up in turn. Passenger trains sometimes share track with freight, so a delay to one can slow the other. Because the Chicago network packs so many junctions into a small area, a small problem travels. That is why the 2003 program went after the physical points where lines cross and the projects that would give each stream its own right of way.
Reading the map from a train window
A rider on Metra or Amtrak can see the freight economy without leaving the seat. Coming into Union Station from the west or south, the train rolls past long strings of boxcars, tank cars and container flats parked in the yards, with cranes at the intermodal terminals and warehouses along the right of way. It is a reminder that the passenger tracks and the freight tracks are one network, and that the skyline is only the visible end of a system that reaches out in every direction.
Freight today
A railroad today does not look like the nineteenth-century version. Big carriers such as Union Pacific and BNSF run long trains of containers and bulk cars, and Chicago remains their meeting point. Intermodal yards move containers between train and truck, which is why truck depots and warehouses cluster along the expressways and the rail corridors, many of them on the Southwest and Southeast sides and in the suburbs.
What does that mean for jobs? The work includes train and engine crews, dispatchers, track maintenance, yard workers, mechanics, truck drivers, warehouse workers and logistics planners. Where Chicagoans work: the city's big employers by sector places the freight sector among the city's other employers.
What it costs the neighbors
The rail economy sends a bill, too. Residents of neighborhoods next to the tracks and yards live with noise, truck traffic and, in places, blocked crossings. CREATE's grade separations are meant to cut the delays at crossings, and the city's Department of Transportation takes part in the planning. Passenger rail shares many corridors with freight, which means a freight delay can slow a Metra train, as commuters on lines like those in metra for first-time riders sometimes find out.
The long arc is plain from the timeline. A canoe portage became a canal, a canal became a rail hub, and a rail hub became the center of a continental freight network that still leans on the same geography. The details change, but the rule of 1848 holds: where lines meet, goods stop, and where goods stop, work follows.